Spark Plug: Service and Repair

PROCEDURE

Removal

1. Remove No. 3 timing belt cover.
2. DIsconnect high-tension cords from Spark Plugs

NOTE: Disconnect the high - tension cords at the rubber boot. Do not pull on the high-tension cords. Pulling on or bending the cords may damage the conductor inside.

3. Using a 16 mm plug wrench, remove the Spark Plugs.

Assembly

1. Reinstall Spark Plugs using a 16 mm plug wrench.

Torque: 18 Nm (13 ft lb)

2. Reconnect high-tension cords to Spark Plugs.
3. Reinstall No. 3 timing belt cover.