Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Cable: Testing and Inspection

1. REMOVE NO.3 TIMING BELT COVERS.
- Refer to Service and Repair.

2. REMOVE HIGH-TENSION CORDS.

NOTICE: Pulling on or bending the cords may damage the conductor inside.

3. INSPECT HIGH-TENSION CORD RESISTANCE.
- Using an ohmmeter, measure the resistance.

Maximum resistance: 25 k Ohms per cord.

- If the resistance is greater than maximum, replace the cord.
4. REINSTALL HIGH-TENSION CORDS.

5. REINSTALL NO.3 TIMING BELT COVERS.