EGR Control Solenoid: Testing and Inspection

1. REMOVE VSV
2. INSPECT VSV
- Inspect VSV for open circuit
- Using an ohmmeter, check that there is continuity between the terminals.

Resistance: At 20°C (68°F): 38.5 - 44.5 Ohms

- If there is no continuity. replace the VSV.





- Inspect VSV for ground
- Using an ohmmeter, check that there is no continuity between each terminal and the body.
- If there is continuity, replace the VSV.





- Inspect VSV operation
- Check that air does not flows from port E to G.





- Apply battery positive voltage across the terminals.
- Check that air flows from port E to G.
- If operation is not as specified, replace the VSV.
3. REINSTALL VSV