Running Board Attachment

RUNNING BOARD ATTACHMENT

Figure 5:

1. Before placing the running board onto the brackets, install the rear side end cap on the rear of the board by sliding the M-8 studs into the end plate slots. Loosely attach the provided M-8 nuts to the studs of the end cap (see figure 5). Do not tighten the end plate to the platform at this time.

2. Slide the running board assembly onto the installed brackets. Attach all brackets loosely to the running board with the provided M-8 bolt assemblies (figure 5).

3. Tighten the brackets to the rocker panel. Torque all M-8 bolts and nuts to 12 ft. lbs.