Distributor Disassembly & Assembly

DISTRIBUTOR DISASSEMBLY





1. REMOVE HEAT INSULATOR
- Remove the 3 screws and heat insulator.
2. REMOVE DISTRIBUTOR CAP
- Loosen the 3 bolts, and remove the distributor cap and O-ring.

ASSEMBLY HINT: Use a new O-ring.





3. REMOVE ROTOR
- Remove the 2 screws and rotor.

ASSEMBLY HINT: Align the hollow of the signal rotor with the protrusion of the rotor.


DISTRIBUTOR INSPECTION

INSPECT SHAFT





- Turn the shaft and check that it is not rough or worn.
- If it feels rough or worn, replace the distributor housing assembly.

DISTRIBUTOR ASSEMBLY

ASSEMBLY HINT: Assembly is in the reverse order of disassembly.