Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 1996 >> SC 400 V8-4.0L (1UZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Distributor >> Service and Repair >> Distributor Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Distributor Removal








1. REMOVE NO.2 TIMING BELT COVERS.





2. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAPS.
3. REMOVE DISTRIBUTOR CAPS
- Loosen the 3 bolts, and remove the distributor cap.
- Remove the 2 distributor caps.

HINT: Arrange the distributor caps (No.1 and No.2).

- Remove the 2 rubber caps from each distributor cap.
4. REMOVE DISTRIBUTOR ROTORS
- Loosen the 2 bolts, and remove the distributor rotor.
- Remove the 2 distributor rotors.

HINT: Arrange the distributor rotors (No.1 and No.2).





5. REMOVE DISTRIBUTOR- HOUSINGS
- No.2 Distributor Housing:
- Disconnect the camshaft position sensor connector.
- Remove the 3 bolts and distributor housing.
- Remove the 2 distributor housings.
6. REMOVE CAMSHAFT POSITION SENSORS FROM DISTRIBUTOR HOUSINGS
- Remove the bolt, screw and camshaft position sensor.
- Remove the 2 camshaft position sensors.
pro multis · About Operation CHARM