Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 1997 >> ES 300 V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Maintenance >> Service Reminder Indicators >> Oil Level Warning Indicator >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Level Warning Indicator: Testing and Inspection


- INSPECT ENGINE OIL LEVEL WARNING SWITCH CONTINUITY




a. Check that there is continuity between terminal with the switch each position.
b. Heat the switch to above 60° C (140° F) in an oil bath.




c. Check that there is continuity between terminals with the switch ON (float up).
d. Check that there is no continuity between terminals with the switch OFF (float down).
If operation is not as specified, replace the switch.







- INSPECT ENGINE OIL LEVEL WARNING SWITCH CIRCUIT
Disconnect the switch connector and inspect the connector on wire harness side, as shown.
If continuity is not as specified, inspect the wire harness or ground point.




- INSPECT ENGINE OIL LEVEL WARNING LIGHT
a. Disconnect the connector from the switch.
b. Ground terminal 1 on the wire harness connector.
c. Turn the ignition switch ON. Check that the warning light lights up after approximately 40 seconds.
If the warning light does not light up, inspect bulb or wire harness.

pro multis · About Operation CHARM