Power Seat Switch: Testing and Inspection

1. INSPECT DRIVER'S SEAT SWITCH CONTINUITY





Slide Switch:

Front Vertical Switch:

Rear Vertical Switch:

Reclining Switch:

Lumbar Support Switch:
If continuity is not as specified, replace the switch.

Terminal Identification:

Reference:

2. INSPECT DRIVER'S SEAT SWITCH CIRCUIT
a. Disconnect the switch connector and connect the seat wire harness to the floor wire harness.
b. Inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the circuits connected to other parts.





3. INSPECT PASSENGER'S SEAT SWITCH CONTINUITY





Slide Switch:

Front Vertical Switch:

Rear Vertical Switch:

Reclining Switch:
If continuity is not as specified, replace the switch.

Terminal Identification:

Reference:

4. INSPECT PASSENGER'S SEAT SWITCH CIRCUIT
a. Disconnect the switch connector and connect the seat wire harness to the floor wire harness.
b. Inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the circuits connected to other parts.