Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Connecting Rod: Service and Repair
DISCONNECT CONNECTING ROD FROM PISTON 1.
Using a small screwdriver, pry out the 2 snap rings.
2.
Gradually heat the
piston to
80° - 90° C (176° - 194° F).
3.
Using plastic-faced hammer and brass bar, lightly tap out the
piston pin and remove the
connecting rod.
NOTE: -
The
piston and pin are a matched set.
-
Arrange the pistons, pins, rings,
connecting rods and bearings in correct order.
