Heater Control Valve: Service and Repair

WATER VALVE REMOVAL





1. DRAIN ENGINE COOLANT

REMOVAL HINT: It is not necessary to drain out all the coolant.

2. DISCONNECT THESE PARTS FROM WATER VALVE:
^ Water hose
^ Vacuum hose
^ Connector





2. REMOVE WATER VALVE
(a) Remove the 2 bolts.
(b) Loosen the hose band, then pull off the water hose.





INSTALLATION HINT:
^ Push the water hose onto the water valve pipe until the pipe is completely hidden.
^ Install the hose clip in a position where about 1 mm (0.039 in.) of the marking on the hose can bee seen.

WATER VALVE INSTALLATION
Installation is in the reverse order of removal.