Service Specifications

Reference Marks, Crankshaft Crank Pin Diameter:
Mark "1" 51.994-52.000 mm (2.0470-2.0472 inch)
Mark "2" 51.988-51.994 mm (2.0468-2.0470 inch)
Mark "3" 51.982-51.988 mm (2.0465-2.0468 inch)

NOTE:
- Reference mark may be found stamped into side crankshaft web.
- Refer to Crankshaft Main Bearing for bearing selection information.

Thrust Clearance:
Standard 0.020-0.220 mm (0.0008-0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust Washer Thickness 2.440-2.490 mm (0.0961-0.0980 inch)
Main Journal Oil Clearance:
Standard:
Bearing No. 1 and No. 5 0.014-0.033 mm (0.0006-0.0013 inch)
All Other Bearings 0.026-0.045 mm (0.0010-0.0018 inch)
Maximum:
Bearings No. 1 and No. 5 0.043 mm (0.0017 inch)
All Other Bearings 0.055 mm (0.0022 inch)
Main Journal Diameter 66.988-67.000 mm (2.6373-2.6391 inch)
Crank pin diameter 51.982-52.000 mm (2.0465-2.0472 inch)
Circle runout 0.08 mm (0.0031 inch) Maximum
Main Journal Out-Of-Round 0.02 mm (0.0008 inch) Maximum
Main Journal Taper 0.02 mm (0.0008 inch) Maximum
Crank Pin Taper 0.02 mm (0.0008 inch) Maximum
Crank Pin Out-Of-Round 0.02 mm (0.0008 inch) Maximum