Washer Fluid Level Indicator: Testing and Inspection

WINDOW WASHER LEVEL WARNING INSPECTION





1. INSPECT WARNING LIGHT
(a) Disconnect the connector from the warning switch and ground terminal on the wire harness side connector.
(b) Turn the ignition switch ON, check that the warning light lights up.
If the warning light does not light up, test the bulb or inspect wire harness.





2. INSPECT SWITCH
(a) Check that there is no continuity between terminals with the switch OFF (float up).
(b) Check that there is continuity between terminals with the switch ON (float down).
If operation is not as specified, replace the switch.