Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 1998 >> ES 300 V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Variable Induction System >> Variable Induction Control Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Variable Induction Control Valve: Service and Repair


REMOVAL





1. DISCONNECT ACTUATOR VACUUM HOSE
2. DISCONNECT DLC1 FROM DLC1 BRACKET
3. REMOVE INTAKE AIR CONTROL VALVE





(a) Remove the 4 nuts and DLC1 bracket, and disconnect the ground strap and cable.
(b) Remove the intake air control valve by prying a screwdriver between the intake air control valve and air intake chamber.
(c) Remove the gasket.

INSTALLATION

1. INSTALL INTAKE AIR CONTROL VALVE





(a) install a new gasket to the air intake chamber.
(b) Apply a light coat of engine oil to the rubber portions.





(c) Apply seal packing to the positions of the intake air control valve shown in the illustration.
Seal packing: Part No. 08826-00080 or equivalent
(d) Install the intake air control valve, DLC1 bracket, ground strap and cable with the 4 nuts.

Torque: 14.5 N.m (145 kgf.cm, 10 ft.lbf)

2. CONNECT DLC1
3. CONNECT ACTUATOR VACUUM HOSE
pro multis · About Operation CHARM