Fuse Block: Testing and Inspection

INSPECT ENGINE ROOM NO.1 JUNCTION BLOCK CIRCUIT







a. Remove the fuse from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.




b. Remove the relay from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.




INSPECT DRIVER SIDE JUNCTION BLOCK CIRCUIT




a. Remove the fuse from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.




b. Remove the relay from the junction block and inspect the connector on junction block side
If the circuit is not as specified, inspect the circuits connected to other parts.




INSPECT PASSENGER SIDE JUNCTION BLOCK CIRCUIT




a. Remove the fuse from the junction block and inspect the connector on junction block side.
If the circuit is not as specified inspect the circuits connected to other parts.




b. Remove the relay from the junction block and inspect the connector on junction block side.
If the circuit is not as specified, inspect the circuits connected to other parts.