Steering Column

Sliding Yoke To:
Control Valve Shaft 35 Nm (26 ft. lbs.)
No.2 Intermediate Shaft 35 Nm (26 ft. lbs.)
Column Assembly Set Nut 25 Nm (19 ft. lbs.)
No.2 Intermediate Shaft To:
No.1 Main Shaft 35 Nm (26 ft. lbs.)
Telescopic Adjusting Screw Lock Nut:
With Special Service Tool (SST) 26 Nm (19 ft. lbs.)
Less SST 35 Nm (26 ft. lbs)
Telescopic Adjusting Screw 7 Nm (62 inch lbs.)
Breakaway Bracket With Telescopic Motor To:
No.1 Lower Tube Bracket 2.8 Nm (25 inch lbs.)
Column Tube Support 15 Nm (11 ft. lbs.)
Tilt Steering Housing Support 13 Nm (108 inch lbs.)
Connector Bracket 2.8 Nm (25 inch lbs.)
Tilt Steering Gear Assembly With Motor To:
Support Stopper Bolt 5 Nm (44 inch lbs.)
Support Stopper Bolt Lock Nut 3 Nm (27 inch lbs.)
Protector And No.2 Protector 5 Nm (44 inch lbs.)
Turn Signal Bracket To:
Column Upper Tube 5 Nm (44 inch lbs.)
Telescopic Sensor Plate 5 Nm (44 inch lbs.)