Alternator Bearing: Service and Repair

1. REPLACE FRONT BEARING




a. Remove the 4 screws and bearing retainer.




b. Using SST and a press, press out the bearing.
SST 09950-60010 (09951-00260, 09952-06010)




c. Using SST and a press, press in a new bearing.
SST 09950-60010 (09951-00500)
d. Install the bearing retainer with the 4 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)

2. REPLACE REAR BEARING




a. Using SST, remove the bearing cover (outside) and bearing.
SST 09820-00021

NOTE: Be careful not to damage the fan.

b. Remove the bearing cover (inside).




c. Place the bearing cover (inside) on the rotor.




d. Using SST and a press, press in a new bearing.
SST 09820-00030




e. Using SST, push in the bearing cover (outside).
SST 09285-76010