P/S Pump

SERVICE SPECIFICATIONS
Pump Rotating Torque 0.3 Nm (2.4 inch lbs.) Or Less
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.03-0.05 mm (0.0012-0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.6 mm (0.339 inch)
Thickness:
Minimum 1.397 mm (0.0550 inch)
Length:
Minimum 14.991 mm (0.5902 inch)
Vane Plate And Pump Rotor Groove Clearance:
Maximum 0.035 mm (0.0014 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.999-15.001 mm (0.59051-0.59059 inch)
1 14.997-14.999 mm (0.59043-0.59051 inch)
2 14.995-14.997 mm (0.59035-0.59043 inch)
3 14.993-14.995 mm (0.59027-0.59035 inch)
4 14.991-14.993 mm (0.59020-0.59027 inch)
Spring Free Length:
Minimum 32.3 mm (1.272 inch)

TORQUE SPECIFICATIONS
Rear Housing To:
Front Housing 24 Nm (17 ft. lbs.)
Pressure Port Union 83 Nm (62 ft. lbs.)
Suction Port Union Set Bolt 13 Nm (108 inch lbs.)
Front Bracket To Rear Bracket 43 Nm (32 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Pump Assembly Set Bolt:
Bolt A:
With Special Service Tool (SST) 29 Nm (21 ft. lbs.)
Less SST 43 Nm (32 ft. lbs.)
Bolt B 43 Nm (32 ft. lbs.)
Oil Pressure Switch 21 Nm (15 ft. lbs.)
PS Pump Assembly To:
Pressure Feed Tube 52 Nm (38 ft. lbs.)