Driver Door Control System

ADJUSTMENT




ADJUST POWER WINDOW MOTOR LIMIT SWITCH
a. Connect the master switch assembly to the wire harness and turn the ignition switch ON.
b. Close the window glass fully.

HINT: Close by manual operation.

c. Using a 2 mm round bar in diameter, press the reset switch to the force of 30 to 50 N (3 to 5 kgf), open the glass fully with a master switch.

HINT:
- When using a wire or equivalent, make sure that tip of it should be flat.
- Open by manual operation.
- Do not damage the rubber on the reset switch.

d. Remove the round bar from the reset switch and fully close the window glass.

HINT: Close by manual operation.

e. Check that window glass can be fully opened and closed by automatic operation.
f. Check functioning of power window.