Disassembly and Reassembly

DISASSEMBLY

1. REMOVE WIRE HARNESS
2. REMOVE BLOWER MOTOR
Remove the 3 screws and blower motor.

3. REMOVE BLOWER MOTOR CONTROL RELAY
a. Disconnect the connectors.
b. Remove the screw and blower motor control relay.

4. REMOVE AIR INLET SERVOMOTOR
a. Disconnect the connector.
b. Remove the 2 screws and servomotor.

5. REMOVE CLEAN AIR FILTER
a. Disconnect the 3 claw and remove the filter cover.
b. Pull out the filter case.
c. Remove the clean air filter from the case.

REASSEMBLY
Reassembly is in the reverse order of disassembly