Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Transistor (For Rear Cooler)

1. REMOVE REAR DOOR SCUFF PLATE RH
2. REMOVE REAR FLOOR MAT SUPPORT PLATE
3. REMOVE QUARTER TRIM PANEL RH




4. REMOVE POWER TRANSISTOR
a. Disconnect the connector.
b. Remove the 2 screws and power transistor.




5. INSPECT POWER TRANSISTOR OPERATION
a. Connect the positive (+) lead to terminal 1 through a 12 V - 3.4 W test bulb and negative (-) lead to terminal 2.
b. Check the test bulb lights up when another positive (+) lead is connected to terminal 4 through a 12 V - 3.4 W test bulb.
If operation is not as specified, replace the power transistor.




6. INSPECT POWER TRANSISTOR RESISTANCE
Measure resistance between terminals 3 and 4.

Standard resistance: 2.0 - 2.4 k Ohms

If resistance is not as specified, replace the power transistor.

7. INSTALL POWER TRANSISTOR
a. Install the power transistor with 2 screws.
b. Connect the connector.
8. INSTALL QUARTER TRIM PANEL RH
9. INSTALL REAR FLOOR MAT SUPPORT PLATE
10. INSTALL REAR DOOR SCUFF PLATE RH