Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2000 >> RX 300 AWD V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Condenser HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Condenser HVAC: Service and Repair




COMPONENTS

REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

HINT: At the time of installation, please refer to the following item.
Evacuate air from refrigeration system.
Charge system with refrigerant and inspect for leakage of refrigerant.

Specified amount : 650 ± 50 g (22.92 ± 1.76 oz.)




2. REMOVE RADIATOR UPPER SEAL
Remove the 7 clips and radiator upper seal.

3. REMOVE FRONT BUMPER




4. DISCONNECT DISCHARGE HOSE AND LIQUID TUBE
Remove the 2 bolts and disconnect the hose and tube.

Torque: 10 Nm (100 kg.cm, 7 ft.lb)

NOTE: Cap the open fittings immediately to keep moisture or dirt out of the system.

HINT: At the time of installation, please refer to the following item.
Lubricate 2 new O-rings with compressor oil and install them to the hose and tube.




5. REMOVE CONDENSER
a. Disconnect the liquid tube piping clamp.
b. Remove the 2 bolts and pull out the condenser upward.

HINT: At the time of installation, please refer to the following item.
If condenser is replaced, add compressor oil to the condenser.

Add 40 cc (1.4 fl.oz)
Compressor oil: ND - OIL 8 or equivalent

INSTALLATION
Installation is In the reverse order of removal.
pro multis · About Operation CHARM