Troubleshooting

Test 1- The Window moves down during the up operation




Test 2- The Down function does not work though some other objects are caught in the power window glass

*1 Resetting method of the motor for limit switch

HINT:
- When replacing the motor from the regulator or running the motor, make sure to reset the motor.
- This operation sets the limit switch OFF.
1. Connect the motor to the vehicle side harness.
2. Rotate the motor from 6 to 10 turns or for 4 - 5 secs. moving it to the glass ascending direction.
- Rotating the motor from 6 to 10 turns for 4 - 5 secs. sets the limit switch to "OFF".
(Top dead center of the door glass.)

*2 Resetting method of the motor for jam protection.
1. Move the window to the fully closed position. (Perform this by manual operation.)
2. Using a 2mm bar, press the reset switch.
3. With the reset switch pressed, move the window to the fully opened position with the master switch. (Perform this by manual operation)
4. Remove the bar from the reset switch, move the window to the fully closed position.