Fuel Pump Control Unit: Testing and Inspection
INSPECTION1. REMOVE SEAT CUSHION AND BACK
2. REMOVE QUARTER TRIM
3. INSPECT FUEL PUMP ECU
a. Disconnect the fuel pump ECU connector.
b. Connect negative (-) terminal cable to the battery.
c. Check the connector on the wiring harness side as shown in the chart.
If circuit is as specified, replace the fuel pump ECU.
d. Disconnect negative (-) terminal cable from the battery.
e. Reconnect the fuel pump ECU connector.
4. INSTALL QUARTER TRIM
Attach the upper side of the quarter trim to the quarter panel.
5. REINSTALL SEAT BACK AND CUSHION