Connecting Rod Bearing

CONNECTING ROD BEARING OIL CLEARANCE
Standard: 0.021-0.047 mm (0.0008-0.0019 in)
Maximum: 0.065 mm (0.0026 in)


BEARING SELECTION








HINT: If using a standard bearing, replace it with one having the same number. If the number of the bearing cannot be determined, select the correct bearing by adding together the numbers imprinted on the connecting rod cap and crankshaft, then selecting the bearing with the same number as the total. There are 6 sizes of standard bearings, marked "2", "3", "4", "5", "6" and "7".

Reference





Connecting Rod Big End Inside Diameter






Crankshaft Crank Pin Diameter






Standard Sized Bearing Center Wall Thickness