Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2001 >> RX 300 FWD V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Power and Ground Distribution >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power and Ground Distribution: Testing and Inspection

POWER SOURCE

INSPECTION




1. INSPECT ENGINE ROOM JUNCTION BLOCK CIRCUIT




a. Remove the fuse from the junction block and inspect the connection on the junction block side.
If the circuit is as specified, inspect the circuits connected to other parts.




b. Remove the relay from the junction block and inspect the connector on the junction block side.




If the circuit is as specified, inspect the circuits connected to other parts.







2. INSPECT FUSIBLE LINK BLOCK CIRCUIT
Remove the fuse from the fusible link and inspect the connector on the fusible link side.
If the circuit is as specified, inspect the circuits connected to other parts.







3. INSPECT RELAY BLOCK NO.2 (Inside Engine Room Junction Block) CIRCUIT
a. Remove the fuse from the relay block No.2 and inspect the connector on the relay block side.
If the circuit is as specified, inspect the circuit connected to other parts.
b. Remove the relay from the relay block No.2 and inspect the connector on the relay block side.
If the circuit is as specified, inspect the circuit connected to other parts.




4. INSPECT ENGINE ROOM RELAY BLOCK NO.3 CIRCUIT




a. Remove the fuse from the engine room relay block No.3 and inspect the connector on the relay block side.
If the circuit is as specified, inspect the circuit connected to other parts.




b. Remove the relay from the engine room relay block No.3 and inspect the connector on the relay block side.
If the circuit is as specified, inspect the circuit connected to other parts.










5. INSPECT INSTRUMENT PANEL JUNCTION BLOCK CIRCUIT
a. Remove the fuse from the instrument panel junction block and inspect the connector on the junction block side.




b. Remove the relay from the instrument junction block and inspect the connector on the junction block side.







If the circuit is as specified, inspect the circuit connected to other parts.

6. INSPECT RELAY BLOCK NO.1 CIRCUIT
Remove the relay from the relay block No.1 and inspect the connector on the relay block side.
If the circuit is as specified, inspect the circuit connected to other parts.
pro multis · About Operation CHARM