Steering Angle Sensor: Service and Repair

COMPONENTS

1. PRECAUTION
2. SHIP MODE SETTING (W/ CD CHANGER)
3. SEPARATE BATTERY NEGATIVE TERMINAL
4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
5. REMOVE SWITCH & VOLUME CASE [86174A]
6. REMOVE STEERING PAD SWITCH MODULATOR [84245A]
7. REMOVE HORN BUTTON ASSEMBLY [45130]
8. REMOVE STEERING WHEEL ASSEMBLY [45100]
SST 09950-50012 (09951-5010, 09952-5010, 09953-5020, 09954-05020)
9. REMOVE TURN SIGNAL SWITCH ASSEMBLY [84310]
10. REMOVE SPIRAL CABLE SUB-ASSEMBLY [84306]
11. REMOVE STEERING SENSOR [89245A]
12. INSTALL STEERING SENSOR [89245A]
13. ADJUST CENTER FRONT WHEEL
14. INSTALL SPIRAL CABLE SUB-ASSEMBLY [84306]
15. CENTER SPIRAL CABLE
16. INSTALL TURN SIGNAL SWITCH ASSEMBLY [84310]
17. INSTALL STEERING WHEEL ASSEMBLY [45100]
Torque: 50 Nm (510 kgf-cm, 37 ft. lbs.)
18. INSPECT STEERING WHEEL CENTER POINT
19. INSTALL HORN BUTTON ASSEMBLY [45130]
Torque: 8.8 Nm (90 kgf-cm, 78 inch lbs.)
20. INSTALL STEERING PAD SWITCH MODULATOR [84245A]
21. INSTALL SWITCH & VOLUME CASE [86174A]
22. INSPECT SRS WARNING LIGHT
23. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
24. PERFORM STEERING ANGLE SENSOR ZERO POINT CALIBRATION