Torque Specification
TORQUE SPECIFICATIONPart 1 Of 2:
Part 2 Of 2:
Torque Sequence
Left Cylinder Head
Right Cylinder Head
Install and uniformly tighten the 10 cylinder head bolts, and plate washers, in the sequence shown.
Mark the front of the cylinder head bolt head with paint.
Retighten the cylinder head bolts by 90° in the numerical order shown.
Retighten the cylinder head bolts by an additional 90°.
Check that the painted mark is now at a 180° angle to front.
Cylinder Head Set Bolt Inspection
Using vernier calipers, measure the thread outside diameter of the bolt.
Standard outside diameter: 9.810 - 9.960 mm (0.3862 - 0.3921 inch)
Minimum outside diameter: 9.700 mm (0.3819 inch)
If the diameter is less than minimum, replace the bolt.