Audio System

DIAGNOSTIC TROUBLE CODE CHART




1. RADIO RECEIVER ASSY (Physical address: 190)

HINT:
- *1: Even if no failure is detected, this trouble code may be stored depending on the battery condition or voltage for starting the engine.
- *2: It is stored when 180 sec. have passed after the power supply connector is pulled out after engine start.
- *3: It may be stored when the engine key is turned 1 min. after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.







a. Logical address: 01 (Communication control)




b. Logical address: 21 (Switch)




c. Logical address: 61 (Cassette Switch)

2. DISC PLAYER CHANGER (Physical address: 240)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting the engine.
- *2: It may be stored when the engine key is turned 1 min. after engine start.
- *3: It may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.




a. Logical address: 01 (Communication control)




b. Logical address: 43 (CD auto changer)

3. STEREO COMPONENT AMPLIFIER ASSY (Physical address: 440)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code may be stored when the engine key is turned again 1 min. after the engine starts.
- *3: This code may be stored when the engine key is turned again after the engine starts.
- *4: When 210 sec. have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.







Logical address: 01 (Communication control)

4. MULTI-DISPLAY CONTROLLER SUB-ASSY (Physical address: 1F6, 16C)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code is stored when 180 sec. have passed after the power supply connector is pulled out after engine start.







a. Main (1F6)
Logical address: 01 (Communication control)




b. Sub (16C)-AVC-LAN L-1
Logical address: 01 (Communication control)

5. STEREO COMPONENT CONTROLLER ASSY (Physical address: 1F4)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: When 210 sec. have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.
- *3: This code may be stored when the engine key is turned 1 min. again after the engine starts.
- *4: This code may be stored when the engine key is turned again after the engine starts.







a. Logical address: 01 (Communication control)