Canada - Body - Roof Rack End Cover, Damaged
BulletinTSB2273
Issue Date
August 03, 2006
Title
ROOF RACK END COVER DAMAGE
Component
BODY COMPONENT
Models
'03 - '06 GX 470
INTRODUCTION:
Some customers may notice the end covers of the roof rack are damaged or missing. New parts have been developed to prevent the cross bars from traveling too far back and damaging or dislodging the end covers.
APPLICABLE VEHICLES:
- 2003 - 2006 model year GX 470 vehicles produced BEFORE the Production Change Effective VINs shown below.
PRODUCTION CHANGE INFORMATION:
PARTS INFORMATION:
WARRANTY INFORMATION:
REPAIR PROCEDURE:
1. Remove the right and left side roof rack end covers.
2. Install the right and left stoppers into the roof rail.
3. Install the right and left rear roof rack end covers as shown in the illustration.
A. Insert the tab at the front of the cover into the roof rack rail.
B. Place the cover on the rack end and align the rear part of the cover. Do NOT press down.
C. Press the cover claws facing the outside of the vehicle into place.
D. Press the cover claws facing the inside of the vehicle into place.
NOTE:
Do NOT press the claws facing the outside of the vehicle at the same time as pressing the claws facing the inside. The leg cover may be damaged.
4. Check that the covers are installed securely.