Illumination Circuit

CIRCUIT DESCRIPTION
The Multiplex Network Body ECU controls the following illumination lamp.
1. Room lamp assy No.1 (Interior light) with DOOR position
2. Map lamp assy (Personal light)
3. Transponder key amplifier (Ignition key cylinder light)

Wiring Diagram:

Step 1 - 2:

Step 2(continued) - 3:

Step 3(continued):

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 in the case of using the hand-held tester, and start from step 2 in the case of not using the hand-held tester.