Upper

REPLACEMENT
1. REMOVE REAR WHEEL
2. DISCONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSY REAR.
3. REMOVE UPPER CONTROL ARM ASSY





a) Remove the nut, washer and bolt from rear axle housing.

HINT: While fixing the bolt, turn and remove the nut.





b) Remove the nut, washer and bolt with the upper control arm assy.

HINT: While fixing the bolt, turn and remove the nut.

4. INSTALL UPPER CONTROL ARM ASSY





a) Install the upper control arm assy, temporarily tighten the nut, washer and bolt.





b) Install the rear axle housing, temporarily tighten the nut, washer and bolt.
5. CONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSY REAR.
6. INSTALL REAR WHEEL
Torque: 112 Nm (1,137 kgf-cm, 82 ft. lbs.)
7. STABILIZE SUSPENSION.





8. FULLY TIGHTEN UPPER CONTROL ARM ASSY
a) Fully tighten the 2 nuts.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)

HINT: While fixing the bolt, turn and install the nut.