Electric Modulated Air Suspension

HEIGHT CONTROL RESERVOIR ASSY (With Electric Modulated Air Suspension)
REPLACEMENT
1. DISCONNECT HEIGHT CONTROL TUBE NO.2
a. Remove the holder.
b. Spread the clip and slowly pull the height control tube No.2 straight out.
c. Remove the 2 O-rings.
2. DISCONNECT HEIGHT CONTROL TUBE NO.6
a. Using SST, disconnect the height control tube No. 6.
SST 09730-00010

NOTICE: Refer to Service Precautions.

b. Remove the 2 O-rings, the plate and the connector No.2.
3. DISCONNECT HEIGHT CONTROL TUBE NO.7
a. Using SST, disconnect the height control tube No. 7.
SST 09730-00010

NOTICE: Refer to Service Precautions.

b. Remove the 2 O-rings, the plate and the connector No.2.
4. REMOVE HEIGHT CONTROL RESERVOIR ASSY
a. Remove the 2 bolts and the height control reservoir assy.
5. INSTALL HEIGHT CONTROL RESERVOIR ASSY
a. Install the height control reservoir assy with the 2 bolts.
Torque: 29 Nm (300 kgf-cm, 21 ft. lbs.)
6. CONNECT HEIGHT CONTROL TUBE NO.7
a. Install 2 new O-rings, a new plate, a new connector No.2, and connect the height control tube No.7.

NOTICE: Refer to Service Precautions.

7. CONNECT HEIGHT CONTROL TUBE NO.6
a. Install 2 new O-rings, a new plate, a new connector No.2, and connect the height control tube No.6.

NOTICE: Refer to Service Precautions.

8. CONNECT HEIGHT CONTROL TUBE NO.2
a. Coat 2 new O-rings with MP grease.
b. Push the height control tube No.2 in straight to connect it until the clip makes "click" sound.
c. Install the holder.
9. INSPECT AIR LEAK