Air Dryer: Service and Repair

HEIGHT CONTROL DRYER ASSY (With Electric Modulated Air Suspension)
REPLACEMENT
1. REMOVE REAR DISC WHEEL
2. REMOVE QUARTER PANEL MUDGUARD REAR LH
3. REMOVE FUEL TANK FILLER PIPE PROTECTOR
4. REMOVE HEIGHT CONTROL COMPRESSOR COVER
5. REMOVE HEIGHT CONTROL FILTER
6. DISCONNECT HEIGHT CONTROL TUBE NO.2
7. REMOVE HEIGHT CONTROL DRYER ASSY





a. Disconnect the connector.
b. Remove the 3 bolts.





c. Remove the 3 bolts, the height control compressor and the dryer with the bracket.
d. Remove the bolt and the dryer.
e. Remove the O-ring.
8. INSTALL HEIGHT CONTROL DRYER ASSY
a. Install the bolt, the dryer and a new O-ring.
Torque: 6.4 Nm (65 kgf-cm, 57 inch lbs.)
b. Assemble the height control compressor, the dryer and the bracket as a unit to the vehicle, and tighten the 3 bolts to fix the bracket to the frame.
Torque: 29 Nm (300 kgf-cm, 21 ft. lbs.)
c. Install the height control compressor assy to the bracket with the 3 bolts.
Torque: 5.9 Nm (60 kgf-cm, 52 inch lbs.)
d. Connect the connector.
9. CONNECT HEIGHT CONTROL TUBE NO.2
10. INSTALL HEIGHT CONTROL FILTER
11. INSTALL HEIGHT CONTROL COMPRESSOR COVER
12. INSPECT AIR LEAK
13. INSTALL FUEL TANK FILLER PIPE PROTECTOR
14. INSTALL QUARTER PANEL MUDGUARD REAR LH
15. INSTALL REAR DISC WHEEL
Torque: 112 Nm (1,140 kgf-cm, 83 ft. lbs.)