How to Proceed With Troubleshooting
HOW TO PROCEED WITH TROUBLESHOOTINGHINT:
^ The following troubleshooting procedure relates to non-electrical system problem symptoms only.
^ For malfunctions in electrical systems such as accumulator pressure sensor, stabilizer control ECU and wire harness, refer to Diagnostic Strategies.
1. Vehicle conditions
2. Suspension fluid
HINT: Check the suspension fluid pressure using the hand-held tester.
Standard:
2.60 to 3.00 MPa at 20°C (68°F) (Fluid temperature)
2.90 to 3.40 MPa at 35°C (95°F) (Fluid temperature)
3. The right and left sides of the vehicle are not level.
4. The vehicle rolls excessively during driving.
5. Suspension fluid pressure is abnormally low.
6. Suspension fluid pressure is abnormally high.