Transmission Cooler: Service and Repair

OIL COOLER ASSY (ATM)
REPLACEMENT
1. DRAIN AUTOMATIC TRANSMISSION FLUID
2. REMOVE OIL COOLER ASSY





a. Loosen the clip and disconnect the oil cooler hose.
b. Loosen the clip and disconnect the transmission oil cooler hose No. 1.
c. Disconnect the oil cooler sub tube.
d. Remove the bolt, 4 bolts and oil cooler assy.
3. INSTALL OIL COOLER ASSY





a. Install the oil cooler assy, bolt and 4 bolts.
Torque: 5.0 Nm (51 kgf-cm, 40 inch lbs.)
b. Install the transmission oil cooler hose No. 1 and clip.
c. Install the oil cooler sub tube.
d. Install the oil cooler hose and clip.
4. ADD AUTOMATIC TRANSMISSION FLUID
5. INSPECT AUTOMATIC TRANSMISSION FLUID