Quarter Window Glass: Service and Repair
QUARTER WINDOW ASSEMBLY LHREPLACEMENT
- The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.
- On the RH side, use the same procedures as on the LH side.
1. REMOVE REAR NO.2 SEAT ASSEMBLY LH
2. REMOVE ROOF SIDE GARNISH INNER LH
a. Remove the quarter scuff plate inside LH.
b. Remove the rear door scuff plate LH.
c. Remove the rear door opening trim weatherstrip LH.
d. Remove the back door weatherstrip.
e. Remove the rear floor mat support plate rear.
f. Remove the quarter inside trim board LH.
g. Remove the roof side garnish inner LH.
3. REMOVE QUARTER WINDOW ASSEMBLY LH
a. Disconnect the connectors.
b. Remove the 2 bolts and 2 nuts.
c. Remove the window assembly LH.
NOTE: Be careful not to damage the body and glass.
4. REMOVE QUARTER WINDOW LOCK ASSEMBLY
a. Remove the screw and window lock assembly.
5. INSTALL QUARTER WINDOW ASSEMBLY LH
a. Install the window assembly with the 2 bolts and 2 nuts.
b. Connect the connectors.