Component Inspection
INSPECTION1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY (LUGGAGE COMPARTMENT DOOR OPENER SWITCH)
a. Measure the resistance between the terminals of the connectors C and D.
If the result is not as specified, replace the switch assembly.
b. Check the switch LED.
1. Apply battery voltage to connector B-2 and check that the switch LED illuminates.
If the result is not as specified, replace the switch assembly.
2. INSPECT LUGGAGE ELECTRICAL KEY SWITCH (PUSH SWITCH)
a. Measure the resistance between the terminals of the connector when the switch is operated.
If the result is not as specified, replace the switch assembly.
3. INSPECT LUGGAGE COMPARTMENT DOOR KEY UNLOCK SWITCH
a. Operate the key cylinder with the key and measure the resistance between terminals 1 and 2 of the switch connector.
If the result is not as specified, replace the switch assembly.
4. INSPECT LUGGAGE COMPARTMENT DOOR STRIKER ASSEMBLY (DOOR UNLOCK SWITCH)
a .Measure the resistance of the switch.
If the result is not as specified, replace the switch assembly.
5. INSPECT LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY
a. Apply battery voltage to the closer motor and check operation of the motor.
If the result is not as specified, replace the closer assembly.
b. Measure the resistance of the courtesy switch.
If the result is not as specified, replace the closer assembly.
c. Measure the open/close position detection switch resistance.
If the result is not as specified, replace the door closer assembly.
If the result is not as specified, replace the door closer assembly.