Replacement
REPLACEMENTHINT: Installation is in the reverse order of removal.
1. PRECAUTION
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2
4. REMOVE INSTRUMENT PANEL GARNISH SUB-ASSY RH
5. REMOVE GLOVE COMPARTMENT PLATE
6. REMOVE GLOVE COMPARTMENT HOLE COVER
7. REMOVE GLOVE COMPARTMENT DOOR ASSY W/INSTRUMENT PANEL AIRBAG ASSY LOWER NO.2
8. REMOVE INSTRUMENT PANEL AIR BAG ASSY LOWER NO.2
a. Remove the 2 bolts and the 2 screws.
b. Disengage the 2 claws and remove the instrument panel airbag assy lower No.2.
9. INSPECT INSTRUMENT PANEL AIR BAG ASSY LOWER NO.2
10. INSTALL INSTRUMENT PANEL AIR BAG ASSY LOWER NO.2
a. Engage the 2 claws and install the instrument panel airbag assy lower No.2.
b. Install the instrument panel airbag assy lower No.2 with the 2 bolts and the 2 screws.
11. CONNECT BATTERY NEGATIVE TERMINAL
NOTE: When disconnecting the negative (-) battery terminal, initialize the system shown in the table after the terminal is reconnected.
12. INSPECT SRS WARNING LIGHT