System Diagnosis

DIAGNOSIS SYSTEM
a. Inspect the battery voltage.
Battery voltage: 11 to 14 V
If the voltage is below 11 V, recharge the battery before proceeding.

b. Indicator lamp




1. During the vehicle height control operation, the absorber control indicator lamp blinks when there is any malfunction in the air suspension system.

NOTE: When the malfunction has been corrected, the absorber control indicator lamp does not come on.




CHECK INDICATOR LAMP
2. Turn the ignition switch to the ON position.
3. Check that the absorber control indicator lamp comes on for 2 seconds.
If the indicator check result is not normal, proceed to troubleshooting for the indicator lamp circuit.

Trouble Area
Absorber control indicator lamp circuit