Fail-Safe Operation

FAIL-SAFE CHART

Fail-Safe Chart:

FAIL-SAFE
This function minimizes the loss of the ECT functions when any malfunction occurs in each sensor or solenoid.

In addition to the switching of the shift pattern through the pattern select switch, the AI-SHIFT control enables the ECM to estimate the road conditions and the driver's intention in order to automatically select the optimal shift pattern. As a result, a comfortable ride has been realized.







a. Fail-safe operation for electronically malfunctioning shift solenoid valve (S1, S2, S3, S4 and SR):

HINT: Fail-safe operation in the event of an electric system malfunction.

Fail safe function:
If either of the shift solenoid valve circuits has an open or short failure, the ECM turns the other shift solenoid "ON" and "OFF" in order to shift into the gear positions shown in the table.

In case of a short circuit, the ECM stops sending current to the short circuited solenoid.

Even if starting the engine again in the fail-safe mode, the gear position remains in the same position.




b. Fail-safe operation for mechanically malfunction:

HINT: Fail-safe operation in the event of a mechanical system malfunction.

Fail safe function:
The ECM controls the gear position as shown in the table when malfunctions occur.