Removal and Installation

Front Heater Unit:

REMOVAL

1. DRAIN ENGINE COOLANT FROM RADIATOR

HINT: It is not necessary to drain out all coolant.




2. DISCONNECT WATER HOSES FROM HEATER RADIATOR PIPES
a. Using pliers, grip the claws of the hose clip and slide the clip along the hose.
b. Disconnect the water hoses from heater radiator pipes.






HINT: At the time of installation , please refer to the following items.
- Push the water hose onto the heater radiator pipe as far as second ridge on the pipe.
- Install a hose clip in the position as shown in the illustration.

3. REMOVE INSTRUMENT PANEL AND REINFORCEMENT
4. REMOVE FRONT COOLING UNIT
5. REMOVE HEATER UNIT




a. Remove the lower defroster nozzle.




b. Disconnect the connector.
c. Remove the 4 nuts and heater unit.

INSTALLATION
Installation is in the reverse order of removal.