Disassembly and Reassembly

DISASSEMBLY




1. REMOVE AIR MIX SERVOMOTOR
Remove the 3 screws and air mix servomotor.

2. REMOVE HEATER RADIATOR




a. Remove the 3 screws and 2 clamps
b. Pull out the heater radiator.




c. Remove the 2 screws, 2clamps and heater radiator pipes.
d. Remove the 2 O-rings.

HINT: At the time of reassembly, please refer to the following item.
Do not reuse the O-rings




3. REMOVE POWER TRANSISTOR
Remove the 2 screws and power transistor.

4. REMOVE BLOWER MOTOR




a. Remove the 3 screws and cover.
b. Remove the 4 screws, 3 holding springs and separate the heater cases.




c. Remove the nut and fan.




d. Remove the screws and blower motor.

REASSEMBLY
Reassembly is in the reverse order of disassembly.