Outer Rear View Mirror

OUTER REAR VIEW MIRROR SUB-ASSY LH

REPLACEMENT

HINT:
- The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.
- Use the same procedures on the RH side as on the LH side.

1. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH
a. Remove the power window regulator master switch.
b. Remove the front door lower frame bracket garnish.
c. Remove the front door inside handle bezel plug.
d. Remove the front door trim board.




2. REMOVE OUTER REAR VIEW MIRROR SUB-ASSY LH
a. Disconnect the connector.
b. Remove the 3 bolts and mirror.




3. INSTALL OUTER REAR VIEW MIRROR SUB-ASSY LH
a. Install the mirror with the 3 bolts.

Torque: 8.0 Nm (82 kgf.cm, 71 in.lbf)

b. Connect the connector.