Rear Combination Lamp Assy
REAR COMBINATION LAMP ASSY LHOVERHAUL
1. REMOVE ROOF SIDE INNER GARNISH COVER LH
2. REMOVE REAR COMBINATION LAMP ASSY LH
a. Disconnect the connectors.
b. Remove the 3 nuts and the rear combination lamp assy LH.
3. REMOVE REAR COMBINATION LAMP BULB
a. Remove the rear combination lamp bulb, the rear combination lamp socket and wire sub-assy LH.
b. Remove the rear combination lamp bulb from the rear combination lamp socket and wire sub-assy LH.
4. REMOVE REAR COMBINATION LAMP BULB
a. Remove the rear combination lamp bulb, the rear combination lamp socket and wire sub-assy LH.
b. Remove the rear combination lamp bulb from the rear combination lamp socket and wire sub-assy LH.
5. REMOVE REAR COMBINATION LAMP SOCKET AND WIRE SUB-ASSY LH
6. REMOVE REAR COMBINATION LAMP LENS GASKET LH
7. REMOVE REAR COMBINATION LAMP BODY LH
a. Using a torx driver (T10), release the claw fitting, remove the 2 screws and rear combination lamp body LH.
NOTE: Remove the tail lamp body so as not to damage the LED element or printed board.
8. REMOVE REAR COMBINATION LAMP LENS & BODY LH
9. INSTALL REAR COMBINATION LAMP BODY LH
a. Using a torx driver (T10), install the rear combination lamp body LH with the 2 screws.
NOTE: Install the tail lamp body so as not to damage the LED element or printed board.