With Manufacturer's Scan Tool

USING HAND-HELD TESTER

a. Connect the hand-held tester to the DLC3.
b. Monitor the ECU data by following the prompts on the tester screen.

HINT: Hand-held tester has a "Snapshot" function which records the monitored data.

Please refer to the hand-held tester operator's manual for further details.

DTC CHECK

a. Checking DTCs
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Read DTCs by following the prompts on the tester screen.

HINT: Please refer to the hand-held tester operator's manual for further details.