Airbag Assembly Connectors

DISCONNECTION
a. Place a finger on the slider.
b. Slide the slider to release lock.
c. Disconnect the connector.




CONNECTION
a. Align the lock part of the male connector and the slider of the female connector in the same direction as shown in the illustration, connect them without rubbing together.
b. Be sure to insert the connectors until they are locked.After connecting them, pull them slightly to check that they are locked.(When locking, make sure that the slider returns to its original position and a click sound can be heard.)

HINT: When connecting them, the slider slides.Be sure not to touch the slider while connecting, as it may result in an insecure fit.