Wire Harness and Connector

CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below.If the initialization is not performed, the SRS may not operate properly.

- The occupant classification ECU is replaced.
- Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
- The passenger seat is removed from the vehicle.
- The SRS warning light comes on.
- The vehicle is brought to the work shop for repair purpose due to the accident or collision.

VEHICLE NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.

VEHICLE INVOLVED IN COLLISION
a. Do a diagnostic system check.
b. Check for breaks in all wires of the SRS wire harness, and exposed conductors.
c. Check to see if the SRS wire harness connectors are cracked or chipped.

HINT: The SRS wire harness is integrated with the engine room main wire, instrument panel wire, instrument panel wire No.2, floor wire, floor wire No.2 and roof wire No.2.