Rear Wiper Motor Assy
REAR WIPER MOTOR ASSYREPLACEMENT
1. REMOVE REAR WIPER ARM COVER
2. REMOVE REAR WIPER ARM ASSY
a. Remove the nut and the rear wiper arm assy.
3. REMOVE BACK DOOR TRIM PANEL ASSY UPPER
4. REMOVE REAR WIPER MOTOR ASSY
a. Remove the 3 bolts.
b. Disconnect the connector, and remove the rear wiper motor assy.
5. INSTALL REAR WIPER MOTOR ASSY
a. Install the rear wiper motor assy with the 3 bolts.
Torque: 5.5 Nm (56 kgf.cm, 49 in.lbf)
b. Connect the connector.
6. INSTALL REAR WIPER ARM ASSY
a. Scrape off the serrated part of the wiper arm with a round file or equivalent.
b. Clean the rear wiper pivot serration with a wire brush.
c. Stop the rear wiper motor assy at the automatic stop position.
d. Install the rear wiper arm in the position shown in the illustration.
e. Install the rear wiper arm assy with the nut.
Torque: 5.5 Nm (56 kgf.cm, 49 in.lbf)