Only Wireless Control Function Does Not Operate

ONLY WIRELESS CONTROL FUNCTION DOES NOT OPERATE (PREPARE NEW OR NORMAL TRANSMITTER OF THE SAME TYPE VEHICLE)

CIRCUIT DESCRIPTION

The door control receiver receives a signal from the transmitter and sends this signal to the multiplex network body ECU. Then, the multiplex network body ECU controls operation of the door locks, power windows and sliding roof. Also, the power back door ECU causes the power back door to open or close when it receives a signal from the transmitter via the door control receiver and multiplex network body ECU.

Wiring Diagram:

Step 1 - 4:

Step 5:

Step 6:

Step 7 - 9:

Step 11 - 13:

Step 14 - 15:

Step 16 - 18:

INSPECTION PROCEDURE