Inspect Mode Switch

INSPECT MODE SWITCH




a. Turn the ignition switch to the ON position.

HINT: Dynamic laser cruise is default mode.




b. After pushing the ON-OFF button on, push the cruise control main switch to MODE for at least 1 second without any other control. Make sure that "NORM." is indicated and no indication is shown in the display.

NOTE: When performing other operations (setting) after pushing the ON-OFF button on, the system cancels the constant speed control mode and cannot return to the mode again.

HINT: If the system cannot switch to the constant speed control mode, push the ON-OFF button off once, and perform the same procedures as shown above. If a malfunction is still detected in the system, and then start the engine again and perform the above procedure.